working interrupt with both ports

lib/mcp23008-17.js

@@ -10,6 +10,7 @@ class MCP23008 extends Device {
         // this.registers = registers // load in register database
       this.ports = {}
       opts.portID = 'A'
+      opts.pids = opts.pids ? opts.pids : opts.pidsA
       this.ports.A = new Port(opts)
       this.chip_config = opts.chip_config // TODO  allow opts.chip_config to be a byte instead of a string pointer
       this.ports.A.interrupt = opts.interruptA ? opts.interruptA : opts.interrupt
@@ -34,6 +35,7 @@ class MCP23008 extends Device {
   }
 
   pin(id) { return this.ports.A.pin(id) } // get a reference to a particular pin's object
+  pid(address) { return this.ports.A.pid(address) }
 
   inter(port = 'A') {
     return this.ports[port].interrupt
@@ -71,16 +73,14 @@ class MCP23008 extends Device {
     } // end writePinsCfg
 
   // reads all pins in all ports
-  readPins(cmd, fmt) {
+  readPins(cmd = 'gpio', fmt) {
     let jobs = []
-    cmd = cmd ? cmd : 'gpio'
     let reg = registers.pin_cmd[cmd]
     for (let port in this.ports) {
       jobs.push(() => super.read(reg))
       reg += 0x10
     }
     return _u.pSeries(jobs)
-
   }
 
   pinRead(id, opts) {
@@ -94,22 +94,21 @@ class MCP23008 extends Device {
             reject('no pin found for given id')
           }
           if (gpio.port === 'B') {
-            reg = reg + 16
+            reg = reg + 0x10
           }
-          // call device class read (response is always decimal)
           console.log('port - reg', gpio.port, reg)
           return mcpdev.read(reg).then(resp => {
             resp = _u.byteFormat(resp, { in: 'DEC',
               out: 'ARY'
             })
-            let addr = gpio.pin.address.toFmt('ARY')
+            let addr = gpio.adr.toFmt('ARY')
             console.log(addr)
             console.log(resp)
             resolve(_u.sum(_u.and(addr, resp))) // resolve 1 or 0
           })
         })
-        .then(state => console.log(`pin state ${state}`))
-        .catch(err => console.log(err)) // end Promise
+        // .then(state => console.log(`pin state ${state}`))
+        // .catch(err => console.log(err)) // end Promise
     } // end pinRead
 
   pinWrite(id, opts) {
@@ -148,6 +147,7 @@ class MCP23017 extends MCP23008 {
     super(busObj, i2cAddress, opts)
       // add a second port
     opts.portID = 'B'
+    opts.pids = opts.pidsB
     this.ports.B = new Port(opts)
     this.ports.B.interrupt = opts.interruptB ? opts.interruptB : opts.interrupt
   }
@@ -159,6 +159,13 @@ class MCP23017 extends MCP23008 {
     return this.ports[port].pin(id)
   }
 
+  pid(address, port) {
+    if (!port) {
+      return this.ports.A.pid(address) ? this.ports.A.pid(address) : this.ports.B.pid(address)
+    }
+    return this.ports[port].pid(address)
+  }
+
 } // end MCP23017 Class
 module.exports.MCP23017 = MCP23017
 
@@ -175,7 +182,7 @@ let chip_config = {
   // byte: ['NULL','INTPOL','ODR','HAEN','DISSLW','SEQOP','MIRROR','BANK']  // see page 18 of 23017 datasheet for 8 setting details
   cmd: 0x0A, // IOCON.BANK=0 (msb) at powerup so need to use 0x0A, if set to 1 then use
   default: {
-    val: '10100010', // Split Banks port A + 0x10 = Port B,(ignored by 23008), Sequential operation disabled, open drain int
+    val: '10100010', // Split Banks port A + 0x10 = Port B,(ignored by 23008), Sequential operation disabled, active high=pulldown
     fmt: 'STR'
   },
   oneint: {
@@ -184,13 +191,6 @@ let chip_config = {
   }
 }
 
-// function chipSetByte(setting = 'default') {
-//   setting = chip_config[setting]
-//   return _u.byteFormat(setting.val, { in: setting.fmt,
-//     out: 'DEC'
-//   })
-// }
-
 let registers = {
   pin_config: {
     dir: 0,