'use strict'
const Device = require('uci-dev').Device,
	Port = require('uci-gpio').Port,
	_u = require('uci-utils'),
	pause = _u.pPause,
	aseq = _u.aSeq

class MCP23008 extends Device {
	constructor(busObj, i2cAddress, opts = {}) {
		super(busObj, i2cAddress, opts)
		// opts could include options passed on to ports and pin  including custom pin config, pin ids...see gpio.js
		this.chip_config = opts.chip_config // TODO  allow opts.chip_config to be a byte instead of a string pointer
		this.ports = {}
		opts.portID = 'A'
		opts.pids = opts.pids ? opts.pids : opts.pidsA
		this.ports.A = new Port(opts)
		this.ports.A.state = new _u.Byte(opts.stateA)
		this.ports.A.interrupt = opts.interruptA ? opts.interruptA : opts.interrupt
	} // end constructor

	async init() {
		// console.log(`begin initialize ${this.id}`)
		await this.writeChipCfg(this.chip_config) // chip settings
		await this.writePinsCfg()
		for (let port in this.ports) {
			console.log(`init port ${port} state`)
			await this.writePort(this.state(port), 'force', port)
		}
	}

	async start() {
		// console.log(`starting ${ this.id }`)
		for (let port in this.ports) {
			// if there are interrupts being used then start them and listeners
			if (this.inter(port)) {
				await this.interruptReset(port)
				await this.inter(port).start()
				// bind handler to the chip so handler can read/write to chip/bank when interrupt is emitted
				let ihandler = this.inter(port).handler.bind(this)
				// inside the listener `this` is the interrupt not the chip/bank
				this.inter(port).on('fired', function () {
					console.log(`interrupt from ${this.pin_number}`)
					ihandler(port)
				})
			}
		}
	}

	async interruptReset(port = 'A') {
		await this.read(portReg(0x08, port))
		await pause(100) // give enough time for mcp to reset its interupt
		// console.log(`interrupt reset on ${this.id} port ${port}`)
	}

	pin(id) { return this.ports.A.pin(id) } // get a reference to a particular pin's object

	pid(address) { return this.ports.A.pid(address) } // return pin id for a given address on a port

	portByPin(id) {
		if (this.ports.A.pin(id)) { return 'A' }
		return false
	}

	state(port = 'A') {
		return this.ports[port].state.value
	}

	// get a handle to the ports interrupt
	inter(port = 'A') {
		return this.ports[port].interrupt
	}

	writeChipCfg(cfg = 'default') {
		// console.log(`writing mcp chip config ${this.id}`)
		let setting = chip_config[cfg]
		let byte = _u.byteFormat(setting.val, { in: setting.fmt,
			out: 'DEC'
		})
		return this.write(chip_config.cmd, byte)
			.then(() => Promise.resolve(`mcp chip config: reg $ { chip_config.cmd } byte $ { byte } written `))
	}

	// pin configurations should already be set before calling
	writePinsCfg() {
		// console.log(`writing mcp pins config ${this.id}`)
		let jobs = [];
		for (let port in this.ports) {
			for (let setting in registers.pin_config) {
				let reg = registers.pin_config[setting]
				// TODO 0x10 should be based on chip config
				let byte = 0;
				let pins = this.ports[port].allPins
				for (let i = 0; i < 8; i++) {
					let pin = pins[i]
					byte += pin.address.toFmt('DEC') * pin.cfg[setting]
				}
				//console.log(`port $ { port } - setting $ { setting } - reg $ { reg } - byte $ { byte }`)
				jobs.push(
					this.write(portReg(reg, port), byte).then(() => Promise.resolve(`
          config: wrote $ { byte } to register $ { reg } on port $ { port }
          `))
				)
			}
		}
		return _u.pSeries(jobs)
	} // end writePinsCfg

	// read(format = 'PLC') {
	//   return u_.byteFormat(this.cur, { in: this.format, out: format })
	// }

	async readPort(port, cmd = "gpio") {
		if ('AB'.indexOf(port) === -1) {
			cmd = port ? port : "gpio"
			port = 'A'
		}
		let result = await this.read(portReg(registers.pin_cmd[cmd], port))
		this.ports[port].state.value = result
		return result
	}

	async writePort(byte, op, port = 'A') {
		// byte MUST be a decimal
		console.log(`current \n ${this.ports[port].state.toFmt('PLC')}`)
		console.log(`byte passed ${op} \n ${_u.byteFormat(byte,{in: 'DEC', out:'PLC'})}`)
		if (op !== 'force') {
			byte = this.ports[port].state.bwOp(byte, op)
		}
		console.log("byte to write decimal \n", byte)
		console.log(`byte to write \n ${_u.byteFormat(byte, { in: 'DEC', out: 'PLC' })}`)

		await this.write(portReg(registers.pin_cmd.gpio, port), byte)
		//update the saved state
		this.ports[port].state.value = byte
		console.log("\n\n")
	}

	async on(pins, port, format) {
		if ('AB'.indexOf(port) === -1) {
			format = port
			port = 'A'
		}
		if (format) { pins = _u.byteFormat(pins, { in: format, out: 'DEC' }) }
		await this.writePort(pins, 'on', port)
	}

	async allOn(port = 'A') {
		let pins = 255
		await this.writePort(pins, 'force', port)
	}

	async off(pins, port, format) {
		if ('AB'.indexOf(port) === -1) {
			format = port
			port = 'A'
		}
		if (format) { pins = _u.byteFormat(pins, { in: format, out: 'DEC' }) }
		await this.writePort(pins, 'off', port)
	}

	async allOff(port = 'A') {
		let pins = 0
		await this.writePort(pins, 'force', port)
	}

	async toggle(pins, port, format) {
		if ('AB'.indexOf(port) === -1) {
			format = port
			port = 'A'
		}
		if (format) { pins = _u.byteFormat(pins, { in: format, out: 'DEC' }) }
		await this.writePort(pins, 'toggle', port)
	}

	async allToggle(port = 'A') {
		let pins = 255
		await this.writePort('toggle', port)
	}

	async force(pins, port, format) {
		if ('AB'.indexOf(port) === -1) {
			format = port
			port = 'A'
		}
		if (format) { pins = _u.byteFormat(pins, { in: format, out: 'DEC' }) }
		await this.writePort(pins, 'force', port)
	}

} // end 23008

module.exports.MCP23008 = MCP23008

class MCP23017 extends MCP23008 {
	constructor(busObj, i2cAddress, opts) {
		super(busObj, i2cAddress, opts)
		// add a second port
		opts.portID = 'B'
		opts.pids = opts.pidsB
		this.ports.B = new Port(opts)
		this.ports.B.state = new _u.Byte(opts.stateB)
		this.ports.B.interrupt = opts.interruptB ? opts.interruptB : opts.interrupt
	}

	pin(id, port) {
		if (!port) {
			return this.ports.A.pin(id) ? this.ports.A.pin(id) : this.ports.B.pin(id)
		}
		return this.ports[port].pin(id)
	}

	pid(address, port) {
		if (!port) {
			return this.ports.A.pid(address)
		}
		return this.ports[port].pid(address)
	}

	portByPin(id) {
		console.log('pin id in portbypin', id)
		if (this.ports.A.pin(id)) { return 'A' }
		if (this.ports.B.pin(id)) { return 'B' }
		return false
	}

} // end MCP23017 Class
module.exports.MCP23017 = MCP23017

// ==============================

function portReg(reg, port) {
	// TODO what to return for port B will depend on chip configuration
	// if not letter assume index 0,1.
	if ((port === 'B') || (port === 1)) { return reg += 0x10 } else { return reg }
}

/* ww1.microchip.com/downloads/en/DeviceDoc/21952b.pdf
 * or see MCP23017.pdf and MCP 23008.pdf in /docs
 * see table 1.5 and details in sections 1.6.x following
 * !!! for 23017 MUST initialize with bit 7 "BANK" of IOCON = 1 for the addresses below
 * then for all registers add 16 (0x10) to each reg address to talk to PortB pins
 * this will make reg addresses be equilvant for 23008 and PortA of 23017
 * reg addresses in the config objects are all in Hexidecminal
 */
// Chip Configuration to be used with Register  See Page 18 of 23017 doc
let chip_config = {
	// byte: ['NULL','INTPOL','ODR','HAEN','DISSLW','SEQOP','MIRROR','BANK']  // see page 18 of 23017 datasheet for 8 setting details
	cmd: 0x0A, // IOCON.BANK=0 (msb) at powerup so need to use 0x0A, if set to 1 then use
	default: {
		val: '10100010', // Split Banks port A + 0x10 = Port B,(ignored by 23008), Sequential operation disabled, active high=pulldown
		fmt: 'STR'
	},
	oneint: {
		val: '11100100', // same as default execpt int pins connected
		fmt: 'STR'
	}
}

let registers = {
	pin_config: {
		dir: 0,
		ivrt: 1,
		pullup: 6,
		intr: 2,
		usedef: 4,
		defval: 3,
	},
	pin_cmd: {
		intf: 7, // readonly
		intcap: 8, // readonly
		gpio: 9, // read/write
		olat: 10 // read only
	}
}